|
 Series
2000 Synthetic Racing and Wheel Bearing Grease
"Unbeatable high-speed/high temperature performance"
Ultimate
protection for hard-driven, high-performance vehicles.
Dramatically reduces friction and wear for improved performance.
Excels at both high and low temperature performance. Outperforms
other conventional and synthetic greases.
Product
Codes:
(Qty
1) 14 oz. cartridge - GRG-CR
(Qty 10) 14 oz. cartridges - GRG-10
Wholesale and preferred customer large discounts of approximately
25% off! To enroll in this program, click
here for details. Preferred customers get DEALER COST!
Applications
AMSOIL
Series 2000 Synthetic Lithium Complex Racing Grease
meets the highest performance standards of the National
Lubricating Grease Institute, GC for wheel bearing
applications and LB for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an
extreme-pressure multi-purpose grease formulated for high-temperature/high-speed
applications. Yet, it excels in the protection of low-speed
bearings, a job usually reserved for heavy-duty products.
Components get the load bearing capacity
of a heavy-duty grease without sacrificing
the high-temperature protection of a multi-purpose.
Anti-Wear
Performance
AMSOIL
Series 2000 Racing Grease passes the
Ford Film Strength Endurance Test with a 16 point margin
(see graph). Most nonsolid-fortified
racing greases, synthetic or conventional,
do not pass. AMSOIL
Series 2000 Racing Grease keeps greased
components in like-new condition.
All-Temperature
Protection
AMSOIL
Series 2000 Racing Grease pairs a high
Viscosity Index synthetic base oil with
a top-quality lithium complex thickener,
known for its extraordinary performance
in temperature extremes.
AMSOIL Series 2000 Racing Grease offers
excellent low-temperature
pumpability and high-temperature
consistency for dependable all-temperature
protection.
Oxidation
Resistance and Inhibition
AMSOIL
Series 2000 Racing Grease’s excellent
oxidation resistance and robust package of oxidation inhibitors
prevent grease breakdown and component
surface damage in the highly oxidizing conditions
associated with high temperature operations.
Friction
Reduction
AMSOIL
Series 2000 Racing Grease maximizes power
through-put and fuel efficiency by minimizing
friction. The extra power given by Series
2000 improves acceleration
and top-end speed.
Washout
Resistance and Corrosion Inhibition
AMSOIL
Series 2000 Racing Grease resists
water wash out and inhibits rust and other
forms of corrosion.
| Typical
Technical Properties |
| AMSOIL
Synthetic Lithium Complex Racing Grease |
NLGI
GC-LB |
Series
2000 Racing Grease |
| Thickener |
NR* |
Lithium
Complex |
| NLGI
Consistency Grade |
NR* |
2
EP |
| NLGI
Performance Grade |
NR* |
GC-LB |
| Penetration
(ASTM D-217) 25� C [77� F], 0.1 mm Worked 60 strokes |
220
- 340 |
265
- 295 |
| Dropping
Point (ASTM D-566) �C [77� F] |
220
[428] |
285
[545] |
| Water
Washout (ASTM D-1264) 79� C [175� F] % loss |
15
max |
5.1 |
| Oil
Separation (ASTM D-1742) 24 hr. @ 25� C [77� F], % loss |
10
max |
2.8 |
| Rust
Protection (ASTM D-1743) |
pass |
pass |
| Timken
OK Load Test (ASTM D-2509), lbs. |
NR* |
60 |
| Fortified
with Moly Compound |
NR* |
no |
| Four
Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm |
0.9
max |
0.32 |
| Compatibility
with other greases |
NR* |
excellent |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Weld Point,
kgf |
200
min |
400 |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Load Wear Index,
kgf |
30
min |
65 |
| High
Temperature Life (ASTM D-3527) hours |
80
min |
300 |
| Fretting
Wear (ASTM D-4170)* mg |
10
max |
3.4 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, GC |
-5
to +30 |
21.6 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, LB |
0
to +30 |
9.88 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, GC |
+2
to -15 |
-3 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, LB |
0
to -10 |
-6 |
| Leakage
(ASTM D-4290), G* |
10
max |
6.0 |
| Low
Temperature Torque (ASTM D-4693) n�m, max @ -40� C [-40�
F] |
15.5 |
2.3 |
| Water
Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| *
NR: Not Required for NLGI GC or LB labeling |
|
Home
Cars