"What do you know about the oil in your car's engine? From the ads, you're led to believe the most exotic part of a Ferrari's engine is in the sump," writes Fast Fours and Rotaries (FFR) (July 1998), an Australian performance car jounal.

The basic concept of oil is to provide a film of lubrication between two surfaces," FFR continues, "reducing friction, wear and heat and ensuring an engine's long life span. But the reality is that while all claim to be superior, there are some that are better than others. We decided to test most of the major brands to see how the well-known brands, the ones most of us can readily buy, shape up in a real-life engine test."

See how poorly Royal Purple's motorcycle oil compared to Amsoil's motorcycle oil in the ASTM D-4172

FFR chose to test only high quality synthetic oils. High quality synthetics are each oil makers' top product and high quality synthetics are "most relevant" to performance enthusiasts. The testers ran each oil through a "short yet grueling" dynomometer session followed by professional oil analysis.

Sam Blumenstein, of COME Racing, performed the dyno testing on his SuperFlow engine dynomometer using a mildly modified five liter V8. Bill Reid, of Lubrication Management, performed the oil analyses. Ryco supplied oil filters.

After establishing baseline performance using a mineral oil, the test team subjected the test oils to three timed sessions at high engine loads, between each of which were three full-power runs.

"The intent," says FFR, "was to establish a number of criteria. Firstly, whether any of the oils would improve horsepower; whether any of the products would lose viscosity; evaluate (the) ability (or lack thereof) to prematurely wear components or suffer from discoloration. As it turned out, discoloration didn't prove to be a factor.

We approached ten oil suppliers/manufacturers, informing them of our intention, and all were reasonably keen and eager to be involved, although Pennzoil didn't want to commit and Penrite flat out said no -- a little strange given this company has actually advertised with and for this (performance) market."

FFR first subjected the oils to a test of viscosity retention. "Note," writes FFR, "that being such a short test it was felt that none of the oils would lose any of its viscosity rating, and indeed six oils suffered an inconsequential loss of less than one percent." The other five, Torco MPZ, Shell Helix Ultra, Shell Helix Plus, Hi-Tec HTO and Castrol R suffered significant viscosity losses.

AMSOIL Series 2000 Synthetic 20W-50 Racing Oil: No Viscosity Loss Reported

FFR points out that the loss of viscosity suffered by the five oils was very rapid. "Under normal conditions it's suggested oil which loses viscosity this quickly would be subject to significant losses over 5000 km (8045 mile). Indeed, one would be suspect of the potential for increased wear over this period."

Oils inhibit wear by inhibiting metal to metal contact of engine parts. To test each oil's ability to protect parts from contact and wear, FFR subjected each oil to a test of wear metal generation. Their test "indicates the size and number of wear particles for each oil. The higher the rating (larger number) the greater the number and size of wear particles," writes FFR.

AMSOIL Series 2000 Synthetic 20W-50 Racing Oil: Lowest Wear Metal Generation

FFR averaged three runs per oil, noting power figures at 500 rpm increments between 3000 and 5000 rpm and noting peak power and torque. While the engine FFR used for testing was a large toleranced engine for which a 20W-50 grade oil is ideal, some of the oil manufacturers supplied 0W-30 grade oils for testing. The low grade viscosity oils delivered somewhat greater horsepower than the high grade oils did, but as FFR notes, "around 4000 rpm the power produced is very similar across the range, and it's only really at the top end where there are substantial differences. That said, the AMSOIL (20W-50), Castrol R (10W-60) and Mobil 5W-50 prove themselves very well."

"Although we've provided criteria to pick and choose an oil, the stand-out to us appears to be AMSOIL, rating well in the viscosity and producing good horsepower.

"With the variety of grades, use this test as a guide but always follow the manufacturers recommendation. But if we were to stick our neck out in the anticipation of the law suits, from the information we gathered specific to the supplied oils in this test, we'd rate the oils in the following order:

#1 AMSOIL
#2 BP Visco 5000
#3 Mobil 1
#4 Mobil 1
#5 Hi-Tec HTO
#6 Shell Helix Ultra
#7 Royal Purple
#8 Castrol R
#9 Castrol SLX
#10 Torco"

Learn more about Amsoil products today! Get your complimentary Factory Direct AMSOIL product catalog & info kit

Your information is kept confidential. Data is never sold or given to anyone.

1. Company: (Optional) 2. First name: 3. Last name : 4. Address : Address (continued): 5. City: 6. State or Province: Zip: 7. Country: United States Canada 8. Your email address: 9. Have you used AMSOIL products before? SELECT Yes No Do you know a local dealer in your area that sells Amsoil? SELECT Yes No (i.e. such as a friend, relative, local store, etc) If yes, are you planning to order through this dealer? SELECT Yes No Who is the dealer? 10. 11. To help serve you better, please describe the year, make, model and engine size of the vehicles or machinery you wish to use Amsoil products: Please check what applies to you (optional): Dealership Option #1 Please send me a dealership application with my catalog so I can be a home AMSOIL dealer (i.e. getting dealer discounts, selling to friends, relatives, businesses or car clubs using small quantities or no inventory, etc.) ($30/yr. dealership fee applies) Dealership Option #2 I want to keep a large inventory of AMSOIL products on hand to sell to the public for people who walk into my store or I have a shop that performs oil changes and wish to sell the 7,500 mile oil. (Typically: Quick lubes, small auto parts stores, high performance shops, motorcycle shop, boating or marine supplies store, etc) Includes optional credit application. No minimum order requirements. Note: Legal corporation and Public Access storefront required. High Quantity Commercial Usage/Consumption I want to save money with AMSOIL in a commercial environment and need to use large quantities (typically 30 or 55 gallon drums) for my company or government (i.e. trucking fleet, rental car agency, police department, landscaping or other establishment using numerous vehicles or equipment) and other areas. I would probably need hundreds or thousands of quarts per year and wish to get wholesale pricing for this volume. Includes optional credit application. Oil is for consumption and not for resale. No minimum order requirements. Note: Legal corporation required.